View MPLEZW-A1-0000-0000C027F_2207471.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cld-26 rev 3 product family data sheet / binning & labeling document cree ? xlamp ? mp-l easywhite? leds www.cr ee.com/xlamp copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. product description the xlamp mp-l e asywhite led eliminates traditional chromatic - ity binning and maximizes lumen density, enabling luminaire and bulb retroft manufacturers to de - liver consistent color and required light output to the target end user. xlamp mp-l e asywhite le ds can reduce l ed-to-le d color variation to within a 2-step macadams ellipse around the desired color tempera - ture, which is 94% smaller than the total area of the corresponding ansi c78.377 color region. the xlamp mp-l e asywhite le d is the perfect choice for lighting ap - plications where high luminous fux output is required from a single, small point source. e xamples of specifc applications include: com - mercial/retail display spotlights, led retroft bulbs, and other indoor general illumination applications. features ? cree easywhite color temperatures ? high lumen density ? wide viewing angle: 125 ? minimum 80 cri at 2700 k and 3000 k cct ? e lectrically neutral thermal path ? rohs-compliant applications ? commercial/residential direc - tional lighting ? led retroft bulbs ? general indoor/outdoor illumi - nation table of contents cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/xlamp copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 label with c ree bin code, qty, lot # ...................................... 10 label with customer order code, .. 10 qty, reel id, po# .......................... 10 product characteristics ............... 2 flux characteristics @ 150 ma (t j = 25c) ............................... 2 relative spectral power distribution (i f = 150 ma per led) ............... 3 e lectrical characteristics (t j = 25c) ............................... 3 relative luminous flux vs current and solder point temperature (steady-state conditions) ........... 4 typical spatial distribution .......... 4 refow soldering characteristics .. 5 bin and order-code format ........ 6 performance groups C brightness ................................ 7 performance groups C chromaticity ............................. 7 cree easywhite color temperatures plotted on the 1931 cie curve ................................. 8 standard order codes and bins (mp-l easywhite) ...................... 9 notes ..................................... 10 mechanical dimensions ............. 12 tape and reel ......................... 13 packaging ............................... 14 label with cree bin code, qty, lot # .................................
2 2 product characteristics characteristics unit minimum typical maximum solder point temperature c 110 viewing angle (fwhm) - white degrees 125 temperature coeffcient of voltage (per led string) mv/c -30 esd classifcation (hbm per mil-std-883d) class 2 total power, all strings @ 150 ma w 11.3 total power, all strings @ 250 ma w 19.9 dc forward current, per l ed string ma 250 reverse current, per l ed string ma 0.1 forward voltage @ 150 ma, per led string v 25.0 26.0 forward voltage @ 250 ma, per led string v 26.5 27.5 moisture sensitivity level rating (msl) msl 2a flux characteristics @ 150 ma (t j = 25c) the following table provides several base order codes for xlamp mp-l e asywhite le ds. for additional order codes, as well as a complete description of the order-code nomenclature, please reference pages 6 through 9 of this document. color cct range base order codes min luminous flux (lm) order code group flux (lm) easywhite 4-step 4,000 k d0 900 mple zw-a1-0000-0000d040f e0 1000 mple zw-a1-0000-0000e040f 3,500 k b0 700 mplezw-a1-0000-0000b035f c0 800 mplezw-a1-0000-0000c035f 3,000 k b0 700 mple zw-a1-0000-0000b030f c0 800 mple zw-a1-0000-0000c030f 2,700 k b0 700 mple zw-a1-0000-0000b027f c0 800 mple zw-a1-0000-0000c027f color cct range base order codes min luminous flux (lm) order code group flux (lm) easywhite 2-step 4,000 k d0 900 mple zw-a1-0000-0000d040h e0 1000 mple zw-a1-0000-0000e040h 3,500 k b0 700 mplezw-a1-0000-0000b035h c0 800 mplezw-a1-0000-0000c035h 3,000 k b0 700 mple zw-a1-0000-0000b030h c0 800 mple zw-a1-0000-0000c030h 2,700 k b0 700 mple zw-a1-0000-0000b027h c0 800 mple zw-a1-0000-0000c027h notes: ? cree maintains a tolerance of 7% on fux and power measurements. ? minimum cri for e asywhite color temper - atures 27f, 27h, 30f, 30h is 80. ? minimum cri for e asywhite color temper - atures 35f, 35h, 40f, 40h is 77. ? typical cri for e asywhite color tempera- tures 35f, 35h, 40f, 40h is 80. ? cree maintains a tolerance of 2 on cri measurements. xlamp mp-l easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
3 3 relative spectral power distribution (i f = 150 ma per led) the following graph represents typical spectral output of the xlamp mp-l e asywhite le d with all le ds on simultane - ously. electrical characteristics (t j = 25c) the following graph represents typical electrical characteristics of an individual string of xlamp mp-l easywhite leds. relative spectral power distribution (if = 150 ma) the following graph represents typical spectral output of the xlamp mpl-ezw led. relative flux output vs. junction temperature (if = 150 ma) 0 20 40 60 80 100 400 450 500 550 600 650 700 750 relative radiant power (%) wavelength (nm) electrical characteristics (tj = 25oc) the following graph represents typical electrical characteristics of each of the three individual strings of the xlamp mpl-ezw led. 0 50 100 150 200 250 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 forward current (ma) forward voltage (v) xlamp mp-l easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
4 4 relative luminous flux vs current and solder point temperature (steady-state conditions) the data below is representative of the xlamp mp-l e asywhite in steady-state operation with all strings driven equally at the current shown. the relative luminous fux is shown as a percentage of the light output under pulsed test conditions (t=20 ms, if=150 ma, tsp=tj=25c). the xlamp mp-l easywhite led is binned under these pulsed test conditions. typical spatial distribution 0 20 40 60 80 100 120 140 5 15 25 35 45 55 65 75 85 95 105 luminous flux, relative to pulsed (%) steady - state solder point temperature ( c) 150 ma 200 ma 250 ma typical spatial radiation pattern (if = 150 ma) typical spatial radiation pattern (if = 250 ma) the following graph represents typical output of the xlamp mpl-ezw led. the following graph represents typical output of the xlamp mpl-ezw led. 0 20 40 60 80 100 120 - 90 - 60 - 30 0 30 60 90 relative luminous intensity (%) angle (o) xlamp mp-l easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
5 5 reflow soldering characteristics in testing, cree has found xlamp mp-l e asywhite le ds to be compatible with jede c j-std-020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of solder paste used. note that this general guideline may not apply to all pcb designs and confgurations of refow soldering equipment. profle feature lead-based solder lead-free solder average ramp-up rate (ts max to tp) 3c/second max. 3c/second max. preheat: temperature min (ts min ) 100c 150c preheat: temperature max (ts max ) 150c 200c preheat: time (ts min to ts max ) 60-120 seconds 60-180 seconds time maintained above: temperature (t l ) 183c 217c time maintained above: time (t l ) 60-150 seconds 60-150 seconds peak/classifcation temperature (tp) 215c 260c time within 5c of actual peak temperature (tp) 10-30 seconds 20-40 seconds ramp-down rate 6c/second max. 6c/second max time 25c to peak temperature 6 minutes max. 8 minutes max. note: all temperatures refer to the topside of the package, measured on the package body surface. xlamp mp-l easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
6 6 bin and order-code format bin codes and order codes are confgured in the following manner: bin code order code ssssss -bb -hhhh-nnnnnnnnn ve rsion number ezw = easywhite internal code color series mpl kit number ssssss -bb -nnn-ff-hh-hhhh ve rsion number flux code series mpl ezw = easywhite internal code chromaticity code color xlamp mp-l easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
7 7 performance groups C brightness xlamp mp-l easywhite leds are tested for luminous fux and placed into one of the following luminous-fux groups: group code min. luminous flux @ 150 ma per string (lm) max. luminous flux @ 150 ma per string (lm) a0 600 700 b0 700 800 c0 800 900 d0 900 1000 e0 1000 1100 f0 1100 1200 performance groups C chromaticity xlamp mp-l easywhite leds are tested for chromaticity and placed into one of the regions defned by the following bounding coordinates. easywhite color temperatures C 4-step code cct x y 40f 4000 k 0.3744 0.3685 0.3782 0.3837 0.3912 0.3917 0.3863 0.3758 35f 3500 k 0.3981 0.3800 0.4040 0.3966 0.4186 0.4037 0.4116 0.3865 30f 3000 k 0.4242 0.3919 0.4322 0.4096 0.4449 0.4141 0.4359 0.3960 27f 2700 k 0.4475 0.3994 0.4573 0.4178 0.4695 0.4207 0.4589 0.4021 easywhite color temperatures C 2-step code cct x y 40h 4000 k 0.3784 0.3741 0.3804 0.3818 0.3867 0.3857 0.3844 0.3778 35h 3500 k 0.4030 0.3857 0.4061 0.3941 0.4132 0.3976 0.4099 0.3890 30h 3000 k 0.4291 0.3973 0.4333 0.4062 0.4395 0.4084 0.4351 0.3994 27h 2700 k 0.4528 0.4046 0.4578 0.4138 0.4638 0.4152 0.4586 0.4060 xlamp mp-l easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
8 8 cree easywhite color temperatures plotted on the 1931 cie curve 2700k 3000k 3500k 4000k 4500k 40f 35f 30f 27f 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 ccy ccx ansi c78.377 quadrangle easywhite "f" (4 - step) chromaticity regions 2700k 3000k 3500k 4000k 4500k 40h 35h 30h 27h 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 ccy ccx ansi c78.377 quadrangle easywhite "h" (2 - step) chromaticity regions xlamp mp-l easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
9 9 standard order codes and bins (mp-l easywhite) the following tables list standard kit numbers and performance bins. kit numbers completely describe an order codes chromaticity regions and luminous fux range. xlamp mp-l easywhite led standard order codes min. luminous flux (lm) @ 150 ma* chromaticity regions kit number group flux (lm) easywhite b0 700 27f 0000b027f 27h 0000b027h 30f 0000b030f 30h 0000b030h 35f 0000b035f 35h 0000b035h c0 800 27f 0000c027f 27h 0000c027h 30f 0000c030f 30h 0000c030h 35f 0000c035f 35h 0000c035h d0 900 40f 0000d040f 40h 0000d040h e0 1000 40f 0000e040f 40h 0000e040h for other fux and chromaticity combinations, contact cree or an authorized distributor. * cree xlamp mp-l easywhite order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity or dwl bin restrictions specifed by the order code. xlamp mp-l easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
10 10 notes lumen maintenance projections based on internal long-term reliability testing, cree projects xlamp mp-l e asywhite le ds to maintain a mean 70% lumen maintenance after 50,000 hours at maximum rated drive current, provided the led solder point temperature is maintained at or below 85c. please read the xlamp long-term lumen maintenance application note for more details on crees lumen maintenance testing and forecasting. please read the xlamp thermal management application note for details on how thermal design, ambient temperature, and drive current affect the l e d junction temperature. moisture sensitivity xlamp mp-l e asywhite le ds are shipped in sealed, moisture- barrier bags (mbb) designed for long shelf life. if xlamp mp-l e asywhite le ds are exposed to moist environments after open - ing the mbb packaging but before soldering, damage to the le d may occur during the soldering operation. the following derating table defnes the maximum exposure time (in days) for an xlamp mp-l e asywhite le d in the listed humidity and temperature conditions. leds with exposure time longer than the time specifed below must be baked according to the baking conditions listed below. baking conditions it is not necessary to bake all xlamp mp-l e asywhite le ds. only the le ds that meet all of the following criteria must be baked: 1. le ds that have been removed from the original mbb packaging 2. le ds that have been exposed to a humid environment longer than listed in the moisture sensitivity section above 3. le ds that have not been soldered le ds should be baked at 80oc for 24 hours. le ds may be baked on the original reels. remove le ds from mbb packaging before baking. do not bake parts at temperatures higher than 80oc. this baking operation resets the exposure time as defned in the moisture sensitivity section above. temp. maximum percent relative humidity 30% 40% 50% 60% 70% 80% 90% 35oc - - - 17 1 .5 .5 30oc - - - 28 1 1 1 25oc - - - - 2 1 1 20oc - - - - 2 1 1 xlamp mp-l easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
11 11 storage conditions xlamp mp-l e asywhite le ds that have been removed from the original mbb packaging but not soldered should be stored in one of the following ways: ? store the parts in a rigid metal container with a tight-ftting lid. verify that the storage temperature is <30c, and place fresh desiccant and an rh indicator in the container to verify that the rh is no greater than 60%. ? store the parts in a dry, nitrogen-purged cabinet or container that actively maintains the temperature at <30 and the rh at no greater than 60%. ? for short-term store only: leds can be resealed in the original mbb bag soon after opening. fresh desiccant may be needed. use the included humidity indicator card to verify <60% rh. if an environment of <60% rh is not available for storage, xlamp mp-l easywhite leds should be baked (described above) before refow soldering. rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or other - wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu directive 2002/95/ ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim warning. do not look at exposed lamp in operation. e ye injury can result. for more information about le ds and eye safety, please refer to the cree l ed e ye safety application note. xlamp mp-l easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
12 12 mechanical dimensions all measurements are .13 mm unless otherwise indicated. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 12.15 13.15 7.075 1.275 11.4 5 6.075 6.1 0.25 0.7250 11 11.3 12.3 13.15 12.15 1 / 1 7.000 b- 2601-00004 mxp lamp product outline -- -- -- -- -- -- 05/13/09 d. cronin revisons rev description by date app'd b added tolerance to dome dc 9/9/10 top view side view bottom view bk ba ck ca rk ra cathode(-): bk, ck, rk anode(+): ba, ca, ra contact pads size: 0.70 x 0.85 pitch: 1.25 xlamp mp-l easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
13 13 tape and reel all dimensions in mm. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contaned within are the proprietary and cree confidential. this plot and the information of cree inc. notice surface finish: 63 330 +.25 -.75 12.4 +1.0 -.5 measured at edge 16.4 +0.2 .0 measured at hub 12.4 +.2 .0 measured at hub .2 13.1 1.9.4 .4 21 60 60 1 / 1 0.500 a 2400-00009 reel, 13" x 12mm, 3 piece snap - anti-static hips -- -- -- -- 09/29/09 d. cronin 2400-00009 index qty item comments 1 1 2400-00009-core 2 2 2400-00009-reel revisons rev description by date app'd xlamp mp-l easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.
14 14 packaging cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # desiccant (inside bag) humidity indicator (inside bag) label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag dessicant (inside bag) humidi t y indicator card (inside bag) p atent label label with customer order code, q t y , r eel i d , po # label with customer order code, qty, reel id, po# label with cree bin code, qty, lot # cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag p atent label label with customer order code, q t y , r eel i d , po # xlamp mp-l easywhite leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc.

▲Up To Search▲

Price & Availability of MPLEZW-A1-0000-0000C027F

	To Download MPLEZW-A1-0000-0000C027F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .